/ - Repository - Capstone Support - The Design Lab at Rensselaer - Electronic Design Notebook

Name	Size	Revision	Age	Author	Comment
2016-03-30-MATLAB Workshop		12	over 8 years	Mark Anderson	wanted to have a folder of this
Course Documents		298	about 3 years	Junichi Kanai	Fixed typos.
PSoC		15	about 8 years	Mark Anderson	accidentally committed hidden files
Process Flowcharts		60	over 5 years	Aren Paster	changed location of flash drives from JEC 2027 ...
Purchasing Forms		221	over 3 years	Valerie Masterson	Getting ready to move purchasing forms
Robotic Work Cell		340	almost 3 years	Aren Paster	Drawing of geometry to tool flange - four M6 ho...
Rubrics		339	about 3 years	Aren Paster	changed the C=3.0 to C=2.0 DID NOT CHANGE THE D...
playbook		329	about 3 years	Mark Anderson	clarification on Gantt charting activity.
tags		346	almost 3 years	Aren Paster	archiving Playbook status at end of Fall 2021
template documents		345	almost 3 years	Aren Paster	adjusted instructions to avoid getting Project ...
training		347	almost 3 years	Mark Anderson	leveraged the Kickoff training from the PMI (pm...
ReliabilityToolkit.pdf	20.7 MB	1	about 13 years	Aren Paster	Engineer's Reliability Toolkit developed by the...
ReliabilityToolkitIndex.pdf	468 KB	2	about 13 years	Mark Anderson	index for the Rome reliability tool kit

#	Date	Author	Comment
347	2021-12-20 12:02 PM	Mark Anderson	leveraged the Kickoff training from the PMI (pmi.org)
346	2021-12-20 11:45 AM	Aren Paster	archiving Playbook status at end of Fall 2021
345	2021-12-20 11:39 AM	Aren Paster	adjusted instructions to avoid getting Project Engineer name: Bob on the first slide, & better visibility of sponsor name.
344	2021-12-20 10:26 AM	Mark Anderson	ongoing adds
343	2021-12-20 10:17 AM	Mark Anderson	gathering thoughts on an eventual training topic
342	2021-12-16 11:02 AM	Mark Anderson	too large for attachment
341	2021-12-15 02:59 PM	Mark Anderson	I had developed this a while ago but never posted! Needs more material on how to ssh into a VM and how to full screen into one
340	2021-12-11 10:57 AM	Aren Paster	Drawing of geometry to tool flange - four M6 holes for holding, one hole for locating pin
339	2021-11-17 08:10 PM	Aren Paster	changed the C=3.0 to C=2.0 DID NOT CHANGE THE DATES at top of file, as this is the only change.
338	2021-11-16 12:05 PM	Mark Anderson	changed the dashboard to show Planned/Actual instead of just Actual

Capstone Support